Type 3911
Converter BOARD 5V / 24V Type 3911
The Converter BOARD 5V / 24V Type 3911 is a universal level and interface board for 5 V and 24 V signals. Optocouplers, relays, a built-in power supply and short-circuit proof outputs make the board suitable for automation and mechatronics tasks.
- Level conversion from 5 V to 24 V and from 24 V to 5 V
- Galvanic isolation of the 5 V and 24 V connections by optocouplers
- 8 digital 5 V inputs to 8 digital 24 V outputs
- 8 digital 24 V inputs to 8 digital 5 V outputs
- Built-in power supply
- Freely wired relays
Level Conversion and Isolation
The Converter BOARD is used to convert 5 V and 24 V signals in both directions. The two voltage domains are galvanically isolated by optocouplers.
The board can be operated with standard leads as well as safety leads. An adapter for connecting mechatronic systems is integrated.
Application Areas
The board is intended for mechatronic systems, automation technology, control applications, electropneumatic systems, industrial controls, small controls, PLCs and digital control systems.
The outputs are short-circuit proof and indicated by LEDs, making the switching state and signal flow easy to observe.
- All outputs short-circuit proof
- Output states indicated by LEDs
- Mains supply
- 220 V AC ... 240 V AC / 115 V AC (110 V AC), approx. 40 VA, 50 ... 60 Hz
- Inputs / outputs
- 8 inputs 24 V DC, 1 output 24 V DC / 750 mA, 7 outputs 24 V DC / 75 mA, 8 inputs 5 V, 8 outputs 5 V
- Relays
- coil voltage 24 V DC; 1 changeover contact 230 V / 3 A
- Mechatronics adapter
- 9-pin Sub-D socket for connecting mechatronic systems
- Front panel
- 5 mm laminated press material
- Rear side
- plastic cover
- Dimensions
- 266 x 297 x 220 mm
- Weight
- approx. 2.4 kg
- Mechatronic systems
- Automation technology
- Control applications
- Electropneumatic systems
- Industrial controls
- Small controls
- PLCs
- Digital control systems
Taken from the tables of contents of the hps experiment manuals (titles, numbers and pages). All manuals are German; titles are shown in the original language. All manuals and experiments
V 0174 Grundlagen der Automatisierungstechnik mit SIMATIC STEP 7 Manual · 240 pages 1 experiment
Additional device in this manual View table of contents
- 10.3.1 Projekt „Datenaustausch mit externen Anlagenkomponenten“ p. 234
No experiment matches the filter.
V 0174 Grundlagen der Automatisierungstechnik mit SIMATIC STEP 7 Solutions · 76 pages 1 experiment
Additional device in this manual View table of contents
- 10 Praktische Übungen p. 49
No experiment matches the filter.
