Type 2104
HALOGEN BOARD Type 2104
The HALOGEN BOARD Type 2104 is a training system for all experiments with low-voltage halogen lamps. Three swivel-mounted lamps, a conventional and an electronic transformer, and an integrated phase-angle control unit make the board suitable for realistic lighting experiments. No special lab table is required.
- All low-voltage halogen lamp experiments on one board
- Three swivel-mounted lamps, one with higher efficiency
- Integrated conventional and electronic transformer
- Built-in phase-angle control
- Various line simulations for realistic wiring
- No special lab table required
Halogen experiments
The board covers all experiments with low-voltage halogen lamps. The three swivel-mounted lamps allow different wiring and comparison tasks, including one lamp with higher efficiency.
Integrated transformers and the phase-angle control make the board suitable for practical teaching and measurement tasks on realistic lamp circuits.
Setup and use
Various line simulations help to reproduce real wiring conditions. No special laboratory table is needed; the board can be operated directly from a standard mains outlet.
A box version is also available.
- Also available in the handy hps Box
- Mains connection
- Mains voltage 220 ... 240 V AC, 50 ... 60 Hz; approx. 20 ... 70 VA depending on wiring
- Integrated lamps
- 2 halogen low-voltage lamps 12 V / 20 W; 1 high-efficiency halogen lamp 12 V / 20 W
- Phase-angle control
- 230 V / 20 ... 315 W
- Transformers
- Conventional transformer 230 V AC / 12 V AC, 60 W; electronic transformer 230 V AC / 12 V AC, 60 W
- Line simulations
- Various line simulations for reproducing real wiring
- Board dimensions
- 532 x 297 x 130 mm (W x H x D)
- Board weight
- approx. 3.8 kg
- Box version dimensions
- 580 x 450 x 155 mm (W x H x D)
- Total weight with box
- approx. 7.0 kg
- Recommended accessories
- Type 2104.1, V 0111, RMS multimeter, lux meter, power meter
Taken from the tables of contents of the hps experiment manuals (titles, numbers and pages). All manuals are in German; titles are translated, the original German title appears on hover. All manuals and experiments
V 0111 Lighting technology Manual · 88 pages 25 experiments
Main device of this manual – applies to all experiments View table of contents
- 2.1 Characteristics of an incandescent lamp p. 30
- 2.2 Characteristics of a halogen incandescent lamp p. 32
- 2.3.2 Illuminance as a function of warm-up time p. 36
- 2.4 Characteristics of a compact fluorescent lamp p. 38
- 2.5.1 Time for starting and ignition p. 40
- 2.5.2 Illuminance when operated with starter and electronic ballast p. 42
- 2.5.3 Illuminance under different ambient conditions p. 43
- 2.5.4 Power relationships when operated with starter p. 44
- 2.5.5 Dimming a fluorescent lamp p. 45
- 2.5.6 Current compensation p. 47
- 2.6 Comparison of the lamps on the ILLUMINATION BOARD p. 49
- 3.1 Characteristics and power relationships of the low-voltage halogen lamp p. 50
- 3.2 Characteristics and power relationships of the high-efficiency low-voltage halogen lamp p. 52
- 3.3 Efficiency of the transformer at different loads p. 55
- 3.4 Dimming the low-voltage halogen lamp p. 57
- 3.5 Dimming the high-efficiency low-voltage halogen lamp p. 58
- 3.6 Influence of cable cross-section and cable length p. 59
- 3.7 Influence of a coiled cable on brightness p. 61
- 4.1.2 Illuminance as a function of warm-up time p. 65
- 4.1.3 Power relationships p. 67
- 4.2.2 Illuminance as a function of warm-up time p. 71
- 4.2.3 Power relationships p. 73
- 4.3.2 Illuminance as a function of warm-up time p. 77
- 4.3.3 Power relationships p. 79
- 4.4 Comparison of the lamps on the SPECIAL LAMP BOARD p. 81
No experiment matches the filter.
V 0111 Lighting technology Solutions · 22 pages 0 experiments
Main device of this manual – applies to all experiments View table of contents
No experiment matches the filter.