Type 1018.5
Oscilloscope- and Visualization Software for 1018.5 USB
The oscilloscope- and visualization software for 1018.5 USB is used to simplify the display of measured signals on the USB oscilloscope. It is intended for use with the PC BASIC, PC ELECTRONIC and PC GENERATOR boards when the optional 1018.5 USB board is installed.
- 2-channel oscilloscope with Ch A and Ch B
- Separate DC and AC inputs per channel via 2 mm sockets
- Maximum input voltage +/-30 V DC
- Ground isolated from the operating ground
- USB interface from USB 1.1 onward
- Runs under Windows XP, Vista and Windows 7 in 32-bit and 64-bit versions
Application and compatibility
The oscilloscope- and visualization software supports the PC BASIC ELECTRONIC BOARD Type 1017.1 USB, the PC ELECTRONIC BOARD Type 1018.1 USB and the PC GENERATOR BOARD Type 1018.2 USB, provided that the optional 1018.5 USB board is installed in the devices.
It is used to simplify the display of measured signals on the USB oscilloscope and complements the training boards with a software-based measurement and visualization environment.
Technical properties and operation
The software provides two channels with separate DC and AC inputs, supports individual or combined signal display, and offers autoscale, variable timebase, zoom, and trigger options on both channels.
In addition, X/Y operation, virtual display units with writing function, and adjustable channel display properties are available.
Delivery and language
The software is delivered on CD-ROM and is written in Technical English.
- Each channel can be displayed individually or together
- Autoscale function can be switched on or off
- Trigger Auto as well as trigger on channel A or B with positive or negative edge
- X/Y mode for Lissajous figures
- Variable timebase with start/stop function
- Zoom function and adjustable display properties
- Virtual display units with writing function
- Software in Technical English
- Delivered on CD-ROM
- Product type
- Oscilloscope- and visualization software
- Channels
- 2 channel oscilloscope, Ch A + Ch B
- Inputs
- Separate DC and AC inputs per channel, plugged in by 2 mm sockets
- Input voltage
- max. +/-30 V DC
- Ground
- isolated from the operating ground (isolated ground)
- USB
- USB interface from USB 1.1 onward
- Operating system
- Windows XP / Vista / Windows 7 in 32-bit and 64-bit versions
- Language
- Technical English
- Delivery
- Software on CD-ROM
