Type LC2030
Laboratory System LC2030
LC2030 extends LC2010 with analogue signals for level, flow and temperature. This makes it possible to work on control, regulation and visualisation tasks either on the real system or in simulation.
- Extension of LC2010 with analogue measurement and control variables
- 0-10 V and 24 V signals on lab sockets
- Level, flow and temperature can be measured
- Stepless adjustment of pump delivery rate
- Heating rod, flow meter and temperature sensor
- WinErs lab version and LC2030 practical package
Setup and signals
All signals are available at the control panel as standard 0-10 V or 24 V signals via lab sockets. This allows the system to be connected to control and regulation units.
Control and regulation
LC2030 extends LC2010 with analogue signals for level, flow and temperature. The pump delivery rate can be adjusted continuously and the heating rod is switched via a lab socket.
- Frame
- 1 x frame with control panel
- Tanks
- 2 x acrylic tanks, 150 x 200 x 400 mm, approx. 9 l
- Pumps
- 2 x centrifugal pumps, max. delivery rate 270 l/h
- Hand valves
- 3 x hand valves for flow adjustment
- Float switches
- 3 x level float switches
- Couplings
- 3 x single-hand coupling with automatic closure for pump connection
- Drain
- 1 x single-hand coupling with drain hose for emptying the tanks
- Lamps
- 2 x indicator lamps (green), 1 x fault lamp (red), 3 x switches, 2 x push buttons
- Variable pump
- 1 x variable pump with frequency converter (0-10 V), max. delivery rate 230 l/h
- Pressure measurement
- 1 x process pressure transmitter for level measurement (0-10 V)
- Options
- flow control, temperature control, cooler for temperature control
- Add-ons
- 1 x flow meter, 1 x temperature sensor PT100 with transducer (0-10 V), 1 x cooler, hoses, 2 x fans, 1 x hand valve for drain adjustment, 1 x heating rod, 1 x circulating pump
- Software
- WinErs simulation version (Type 007006 EVDE), LC2030 practical package (Type 004014 EVDE)
