Type 9152.7
Empty Housing (75 x 56 x 35 mm, series 94xx)
Plug-in empty housing 75 x 56 x 35 mm (series 94xx) with snap fastener and clamping device for the universal PCBs type 9167 / 9167.1.
Description
Empty housing (series 94xx) with 2 gold-plated lamella plugs, 4 mm Ø, 2 nuts and 1 solder tag.
The empty housing is intended for fitting the universal PCB. It consists of an upper part made of unbreakable transparent plastic and a sturdy lower part made of black glass-fibre reinforced plastic. The lower part has holes arranged in the 19 mm grid for screwing in lamella plugs.
Upper and lower part are joined by two snap fasteners, allowing the housing to be closed and opened quickly and easily. The universal PCB is held by a clamping device; no additional screws are required.
The front of the upper part has 14 holes on each of the right and left long sides for passing through the collar sleeves soldered into the universal PCB.
Technical data
- Plug arrangement in the 19 mm grid
- Plug diameter: 4 mm
- Housing dimensions: 75 x 56 x 35 mm (W x D x H)
- Distance from the fitted universal PCB to the upper part of the housing: 18 mm
- Distance from the fitted universal PCB to the lower part of the housing: 9 mm
- supplied accessories: 2 lamella plugs (4 mm) type 9160.1, with solder tags and nuts
Kit for your own plug-in modules
The kit was developed for building your own plug-in modules with simple to complex circuits of electrical engineering / electronics, also beyond the hps standard programme. It consists of the following individual components:
- Empty housing (type 9152.7)
- Label for marking the empty housing (type 9162.5-6)
- Universal PCB (type 9167 or type 9167.1)
- Collar sleeves (type 9168)