Type 9131.2
Relay (with driver)
Plug-in relay with three changeover contacts and built-in driver stage for TTL control, operating voltage 5 V DC.
Description
pluggable, in an unbreakable transparent plastic housing with two gold-plated lamella plugs
The circuit symbols are printed in white on the top of the housing.
The relay is equipped with three changeover contacts, which can be wired from the top of the housing via 2 mm sockets.
The supply voltage (5 V DC) is provided via the plugs in the base of the housing. The relay can be controlled with TTL pulses via the built-in driver stage.
The switching state is indicated by an LED.
Technical data
- Plug arrangement in the 19 mm grid
- Plug diameter: 4 mm
- Housing dimensions: 75 x 56 x 35 mm (W x D x H)
- Operating voltage: 5 V DC
- Driver input: TTL signal
- Input current: 100 µA
Relay contacts
- Material: Ag
- switchable current: 1 A (DC / AC)
- switchable voltage: 100 V (DC / AC)
- switchable power: 30 VA
- contact resistance: 50 mΩ
Note
For reasons of protection against electric shock, the components may only be operated up to the maximum permissible safety extra-low voltage.