UNIVERSAL COMPONENT BOARD Type 2150

Description

UNIVERSAL COMPONENT BOARD for mounting industrial components with DIN rail installation.

UNIVERSAL COMPONENT BOARD I (Type 2150) with internal DIN rails.

Commissioning of industrial components via safety sockets and integration into existing teaching systems.

Wide range of insert modules.

Cost-effective implementation of your own ideas.

Suitable for project work.

Mechanical data

On the types with external DIN rails the rail can be mounted at two different heights. This allows industrial components to be mounted even if the DIN rail receptacle is off-center.

Front panel material: laminate (5 mm), matte blue.

Rear side: sloping hood made of grey plastic.

Dimensions: 266 x 297 x 95 mm (W x H x D).

Weight: approx. 1.5 kg.

Insert modules

Overview of the currently available insert modules suitable for the UNIVERSAL COMPONENT BOARDs.

• DC SUPPLY (Type 2150.15) - Connection of 24 V DC via 4 mm safety sockets or hollow plug for plug-in power supply (Type 3816) 24 V DC / 1 A
• DIGITAL IN (Type 2150.16) - 4 digital inputs via 4 mm safety sockets and additional stimulation via 4 push / latch switches
• ANALOG (Type 2150.17) - 4 analog inputs, 2 analog outputs, 1 PT 100 input via 4 mm safety sockets
• DIGITAL IN (Type 2150.18) - 8 digital inputs via 4 mm safety sockets
• DIGITAL OUT (Type 2150.19) - 8 digital outputs via 4 mm safety sockets
• MAINS (Type 2150.20) - single-phase mains connection with 2-pole mains switch, additional fuse and 3-wire mains lead
• DIGITAL OUT (Type 2150.21) - 4 potential-free normally-open contacts via 4 mm safety sockets
• MECHATRONIC ADAPTER (Type 2150.22) - 9-pin and 25-pin Sub-D connector for connecting mechatronic systems to a PLC
• INPUT/LAMP (Type 2150.24) - 4 lamps, 24 V / 4 connections via 4 mm safety sockets
• CABLE ADAPTER (Type 2150.25) - for connecting 8 standard installation wires
• DIGITAL IN AC (Type 2150.27) - 4 digital inputs via 4 mm safety sockets and additional stimulation via 4 push / latch switches 230 V AC
• MAINS (Type 2150.60) - for 230 V AC mains connection via 4 mm safety sockets, with phase indicator lamp
• Blank panel (Type 2130.19 / 2130.25) - for covering free expansion slots

Delivery of the insert modules

Fully assembled insert module with plastic dowels for mounting in the UNIVERSAL COMPONENT BOARD.

Leads for connecting the insert module to the component are included.

For the UNIVERSAL COMPONENT BOARDs Type 2150 and 2152, covers are included so the remaining opening in the front can be closed after component mounting.