Transmission Modes / Fibre Optics
FIBRE OPTIC TRANSMITTER UND RECEIVER BOARD
- Universal training system for the transmission of signals with optical fibres, infrared link or connection line
- Can be used with the MODULATION BOARD and the DEMODULATION BOARD, as well as with other hps training systems
- Also very suitable to perform experiments with usual commercial generators and measuring instruments
- With analog and digital channel suitable for all fundamental experiments of the fibre optics technology
- With two built-in transmit diodes of different wavelengths
- Two amplifiers and different terminating resistors allow experiments with coaxial lines
- Can be extended with an Optical Bench and with the COAXIAL BOARD
Download Data shee (99 KB) |
Experiment manual, contents (11 KB) |
TRANSMITTER- / RECEIVER BOARD
- For plastic and glass fibres
- With built-in transmit diodes in different wavelengths of the light
- Characteristic recording and attenuation measurement also possible with DC voltages
- Coupling attenuations can be simulated directly on the Receiver Board
- All necessary power supplies and generators on the Board
- Additional experiments with laser diode
Download Data sheet (120 KB) |
Experiment manual, contents (138 KB) |
COAXIAL BOARD
- Training Board for experiments with a screened line
- Line length 50 m, divided in 2 x 25 m
- With incorporated LEDs for demonstration of standing waves in a line
- Incorporated terminating resistor, adjustable
- Several COAXIAL BOARDs can be connected one after the other to simulate longer lines
Data sheet (98 KB) |
Download Experiment manual, contents (9 KB) |
Comments are closed.